Development of an inspection robot for gas distribution mains: a Mars-mission underground

The PIRATE project is aimed to design an energy efficient robot system, capable of autonomous navigation in low-pressure gas distribution network. A prototype of the robot structure is currently being evaluated. The prototype is able to move trough pipes of various diameters, and sharp corners can be taken (semi) autonomously. Because of the harsh conditions (temperature, gas, dust), the complex network structure and the lack of communication (no long-range transmission underground) and hence the necessary autonomy for the robot, this project can be compared to a Mars-mission underground

Geometric dynamics analysis of humanoids - locked inertia

The advantage of geometric dynamics analysis over most classical 3D analysis is that the equations are coordinate- neutral: as long as all quantities are expressed in the same coordinate frame, the equations are correct

Velocity control of a 2D dynamic walking robot

In this abstract we introduce velocity control for our 2D dynamic walking robot Dribbel [1] (figure 1) and show that, by ‘closing the loop’, this automatically leads to increased robustness

Vision based motion control for a humanoid head

This paper describes the design of a motion control algorithm for a humanoid robotic head, which consists of a neck with four degrees of freedom and two eyes (a stereo pair system) that tilt on a common axis and rotate sideways freely. The kinematic and dynamic properties of the head are analyzed and modeled using screw theory. The motion control algorithm is designed to receive, as an input, the output of a vision processing algorithm and to exploit the redundancy of the system for the realization of the movements. This algorithm is designed to enable the head to focus on and to follow a target, showing human-like motions. The performance of the control algorithm has been tested in a simulated environment and, then, experimentally applied to the real humanoid head

Motion control of the Twente humanoid head

In this work, we present the design and the realization of the motion control algorithm implemented in the Twente hu- manoid head, a seven degrees of freedom (dof) robotic sys- tem. The aim of the project is to have a humanoid head that can serve as a research platform for human-machine interac- tion purposes. The head should not only be able to percieve its environment and track objects, but also be able to move in a human-like way, i.e. to reproduce the motions of human beings and to mime the human expressions

Compensation of position errors in passivity based teleoperation over packet switched communication networks

Because of the use of scattering based communication channels, passivity based telemanipulation systems can be subject to a steady state position error between master and slave robots. In this paper, we consider the case in which the passive master and slave sides communicate through a packet switched communication channel (e.g. Internet) and we provide a modification of the slave impedance controller for compensating the steady state position error arising in free motion because of packets loss

Port-Hamiltonian modeling for soft-finger manipulation

In this paper, we present a port-Hamiltonian model of a multi-fingered robotic hand, with soft-pads, while grasping and manipulating an object. The algebraic constraints of the interconnected systems are represented by a geometric object, called Dirac structure. This provides a powerful way to describe the non-contact to contact transition and contact viscoelasticity, by using the concepts of energy flows and power preserving interconnections. Using the port based model, an Intrinsically Passive Controller (IPC) is used to control the internal forces. Simulation results validate the model and demonstrate the effectiveness of the port-based approach

Modeling and design of energy efficient variable stiffness actuators

In this paper, we provide a port-based mathematical framework for analyzing and modeling variable stiffness actuators. The framework provides important insights in the energy requirements and, therefore, it is an important tool for the design of energy efficient variable stiffness actuators. Based on new insights gained from this approach, a novel conceptual actuator is presented. Simulations show that the apparent output stiffness of this actuator can be dynamically changed in an energy efficient way

Principle design of an energy efficient transfemoral prosthesis

In the pursuit of realizing an energy efficient transfemoral prosthetic, in this paper we present a preliminary study on a principle design. In particular, the design is based on the idea that the efficiency of the system can be realized by energetically coupling the knee and the ankle joints. In order to allow the energy transfer during the normal walking, we propose to introduce continuous controllable springs, which basically act as passive actuators